ProdottoSBE-18 pH Sensor SBE-18 pH Sensor The SBE 18 pH Sensor uses a pressure-balanced glass-electrode /Ag/AgCl-reference pH probe to provide in-situ measurements at depths up to 1200 meters (3900 ft). SBE-18 pH SensorSea-Bird ElectronicsThe SBE 18 pH Sensor uses a pressure-balanced glass-electrode /Ag/AgCl-reference pH probe to provide in-situ measurements at depths up to 1200 meters (3900 ft).The replaceable pH probe is permanently sealed and is supplied with a soaker bottle attachment that prevents the reference electrode from drying out during storage. The sensor and associated interface electronics is a modular, self-contained package that is easy to install, service, and calibrate. The SBE 18 is intended for use as an add-on auxiliary sensor for profiling CTDs (SBE 9plus; SBE 19, 19plus, and 19plus V2 SeaCAT; and SBE 25 and 25plus Sealogger). Power / signal interface cables and mounting hardware are available separately. The SBE 18's interface circuits buffer and offset the differential glass-electrode/reference potential to produce a high-level pH-dependent output voltage. Computation of pH in engineering units is typically done using our Seasoft© V2 software. Sea-Bird calibrates the pH sensor against precision buffer solutions (4, 7, and 10 pH ± 0.02 pH). These calibration results are tabulated on a certificate furnished with each sensor. DocumentiDepliantBrochure SBE-18 - Download Application Note AN 18-1: SBE 18, 27, and 30, & AMT pH Sensor Calibration (PHFIT Version 2.1) - Download AN 18-2: SBE 18, 22, 27, and 30 pH Sensor Storage, Maintenance, & Calibration - Download AN 18-3: SBE 18 pH Sensor Hookup Instructions - Download AN 71: Desiccant Use and Regeneration (drying) - Download AN 76: pH or pH/ORP Sensors and Moored Applications - Download Technical Papers Reliably Measuring pH In the Ocean - Download Shallow vs. Deep SeapHOx V2 - Major Differences and Determining Appropriate Use Cases - Download |
