The SBE 16plus V2 (Version 2) SeaCAT Recorder measures temperature and conductivity (pressure optional) and provides high accuracy and resolution, reliability, and ease-of-use on moorings and other long-duration, fixed-site deployments.
Sea-Bird ElectronicsThe SBE 16plus V2 (Version 2) SeaCAT Recorder measures temperature and conductivity (pressure optional) and provides high accuracy and resolution, reliability, and ease-of-use on moorings and other long-duration, fixed-site deployments.
Compared to the previous 16plus, the V2 incorporates an electronics upgrade and additional features, with six differentially amplified A/D input channels, one RS-232 data input channel, and 64 MB FLASH memory. Data can be output in XML as well as ASCII and HEX formats. Firmware upgrades can be downloaded through the communications port, without opening the instrument.
The SBE 16plus V2 uses the same temperature and conductivity sensors (and optional strain gauge or Digiquartz® pressure sensor) proven in 10,000 SeaCATs and MicroCATs. The unique internal-field conductivity cell permits the use of expendable anti-foulant devices, for long-term bio-fouling protection.
Calibration coefficients, stored in memory, permit data output in ASCII engineering units (degrees C, Siemens/m, decibars, salinity [PSU], sound velocity [m/sec.], etc.). The sample interval, ranging from 10 to 14,400 seconds, is user-programmable in 1-second increments. Between samples, the SBE 16plus V2 powers down, drawing only 20 microAmps. Nine alkaline D-cells provide power for 355,000 samples of C and T. Conditioned power (500 mA) is available for auxiliary sensors (dissolved oxygen, turbidity, fluorescence, PAR, etc.). Data is recorded in memory for 38.4K baud upload after recovery.
Real-time monitoring is practical using the SBE 16plus V2 3-wire RS-232C data output. The 16plus V2 is well suited to networked sensor arrays where its operation can be triggered by satellite, radio, or hardwire telemetry equipment. An optional inductive modem (1-wire loop) interface allows multiple SeaCATs to share a simple and robust telemetry cable.
Brochure SBE-16plusV2 IM - Download
Manuale SBE-16plus V2 IM - Download
AN 02D: Instructions for Care and Cleaning of Conductivity Cells (03/14) - Download
AN 06: Determination of Sound Velocity from CTD Data - Download
AN 10: Compressibility Comp of SBE Conductivity Sensors (05/13) - Download
AN 14: 1978 Practical Salinity Scale - Download
AN 27Druck: Minimizing Strain Gauge Pressure Sensor Errors - Download
AN 34: Instructions for use of Conductivity Cell - Download
AN 42: ITS-90 Temperature Scale - Download
AN 67: Editing Sea-Bird .hex Data Files - Download
AN 69: Conversion of Pressure to Depth - Download
AN 71: Desiccant Use and Regeneration (drying) - Download
AN 73: Using Instruments with Pressure Sensors at Elevations Above Sea Level - Download
AN 75: Maintenance of SBE 5T, 5P, and 5M Pumps - Download
AN 83: Deployment of Moored Instruments - Download
AN 84: Using Instruments with Druck Pressure Sensors in Muddy or Biologically Productive Environments - Download
AN 85: Handling of Ferrite Core on Instruments with Inductive Modem Telemetry - Download
Guide to CTDs - Download
AN 93: CTD Basics - Download
Advanced Data Processing: Batch Processing - Download
Guide to CTDs - Download
Guide to Inductive Moorings - Download
From the seafloor to the sea surface: a technical solution for the cabled EMSO-SN1 observatory in the Western Ionian Sea - Oceans 2015 - Genova - Download
Exploring the water column from the cabled EMSO-SN1 observatory - TMTW 2018 - Download