Products:
by Manufacturer
Standard, Model 110
Non-metallic, free-flushing water sampler recommended for general purpose
water sampling. These samplers can be individually or serially attached on
a hydrocable and activated by a messenger or placed on a rosette system and
activated by remote command.
The sampler has a rigid body made of gray PVC with power closure made of latex
tubing or metal spring. PVC mounting blocks are glued to the body for
loading on a rosette system and with clamp bolts for attachment on wire.
It comes equipped with lanyards for wire and rosette loading. Delrin drain
valve and Buna
O-rings are common accessories.
Models 110A & 110B
Standard A, Model 100A, is a simplified version of the original Standard,
Model 110. It has the body made of PVC, with spring closure made of latex
tubing activating the tow end plugs to complete the enclosure. It does not
have mounting blocks or handle. It is specifically designed as an
economical water sampler which can be directly attached with clamps or other
means to the frame of a submersible array system.
Standard B, Model 110B, has the body of Standard A with an aluminum bracket
attached with two stainless steel clamps. Also, has a handle attached for
easy handling and lanyard guidance. The bracket gives a greater resistance
to breakage and to artic conditions. The bracket is easily removable and
interchangeable.
Reversing Thermometer Assembly, Model 112 RTA
A non-metallic, high-impact ABS plastic thermometer rack is attached to a
pivotal PVC mounting block. The mounting block is permanently fixed on the
sampler body. The rack which can hold three (3) reversing thermometers is
easily removable and interchangeable.
Double Wall Model 120
Non-metallic, free-flushing water sampler recommended for analyzing traces of
gases dissolved in water. A polyethylene inside liner is attached at both
ends to an outer rigid PVC cylindrical body. To complete the closure, two
pivoting end plugs are tied together with a power cord at both ends to entrap
the water sample when desired. The liner is easily replaced.
Standard ES, Model 115
Standard ES is a version or our very popular Standard Water
Sampler, similar with Niskin type.
The internal power cord, which activates the closing mechanism is placed outside
along the rigid PVC body, eliminating the risk of sample contamination.
Also, with this arrangement, the power cord can be easily inspected and replaced
when becomes weak after a period of time. All the other characteristics of
this type of sampler remain unaltered.
The simplicity of this improved water sampler, easy to operate and very cost
effective, makes it attractive.
C-Free Chamber Water Sampler, Model 114
The C-Free Chamber Water Sampler is a nonmetallic, sturdy body construction
made of grey PVC. This product provides the same basic performance as the
Niskin type water sampler. Additionally, its internal chamber is free of
any source of contamination. The closing mechanism is of a ball-valve type
activated by an external power cord. The effectiveness of the seal is
ensured continuously even in the event the power cord becomes weak or damaged.
Also, this arrangement ensures a very reliable seal, eliminating any leakage
caused by accidental bumping or shaking of the sampler during recovery.
During deployment the sampler has both ends open allowing for free-flushing for
accurate layer sampling.
The absence of an internal source of contamination allows for storing the sample
inside the sampler for an extended period of time before being drained.
A pressure release valve can be added for close-open-close deployment.
This feature prevents contamination from the surface layer of water.
Water Sampler, C-Free, Model 130
