Current Meters
|
Single Point Doppler current meters
|
 | RCM-9 - 1000 m rated
The instrument is delivered with a
Temperature Sensor and an 8 ton Mooring Frame
as standard. Optional sensors for Conductivity, Pressure, Turbidity &
Oxygen.
|
|
 |
RCM-11 - 6000 m rated
The instrument is
delivered with a Temperature Sensor and an 8-ton Mooring Frame as
standard. Optional sensors for Conductivity, Pressure, Turbidity
& Oxygen. The latter two can only be used
down to 2000 meters depth.
|
|
 |
DCS-3900 Sensor
A rugged and reliable sensor that offers users great
flexibility to obtain accurate current measurements. Intended for
commercial as well as for re-search purposes. It can be used to
monitor the water current in harbours, along the coast, near
offshore oil platforms.
|
|
Accessories for single
point doppler current meters
|
 | Doppler Test Unit
For testing the function of the Recording Current Meters RCM 9, RCM
11 and the Doppler Current Sensors.
|
|
Monitoring
Systems
|
Oceanographic Buoy
|
 |
Coastal Monitoring Buoy
CMB-4280
The Coastal Monitoring Buoy CMB 4280 is a rugged,
lightweight and compact data buoy intended for use along the coast,
in ports and harbours and near off-shore platforms. It measures wave
height and period, sea current speed and direction, sea temperature
as well as the most important meteorological parameters and
transmits data ashore in real-time if a VHF or UHF radio or radio
modem is connected.
|
|
 |
Coastal Monitoring Buoy
CMB-3280
High reliability and low cost. Standard or customer
specified sensor configuration. A moored data buoy for measuring
meteorological conditions wave height and wave period current speed,
current direction temperature, salinity, turbidity or conductivity
of the water in a specific coastal area and to convey this
information to the user in real-time. Compact, lightweight and easy
to install. Solar cell powered.
|
|
Weather Station
|
 |
AWS-2700
Rugged self-contained station suited for use in remote
places without electricity supply. Data can be recorded on site or
be transmitted in real-time. A standard four-meter station is fitted
with sensors for wind speed and gust, wind direction, air
temperature, relative humidity, air pressure, visibility, sunshine
duration, net radiation, rainfall.
|
|
Sensors
|
Water Sensors
|
 |
pH
A sensor for measuring the pH value of water in lakes and
fjords
|
|
 |
Turbidity
& Temperature
A rugged sensor for measuring the turbidity of the water
based on scattered infra-red light and temperature by means of a
thermistor
|
|
 |
Oxygen
Optode
Uses the latest technology for measuring dissolved oxygen
in fresh and salt water The principle of measurement is based on the
effect of dynamic luminescence quenching (lifetime based) by
molecular oxygen.
|
|
 | Salinity
& Temperature
Sensor for direct measurement of salinity & temperature.
Designed for use with Aanderaa Dataloggers or Display Units.
|
|
 |
Conductivity
& Temperature
Sensor for direct measurement of conductivity &
temperature. Designed for use with Aanderaa Dataloggers or Display
Units.
|
|
 |
Salinity,
Temperature & Depth
Sensor for direct measurement of salinity, temperature
and depth. Designed for use with Aanderaa Dataloggers or Display
Units.
|
|
 |
Conductivity,
Temperature & Depth
Sensor for direct measurement of conductivity,
temperature and depth. Designed for use with Aanderaa Dataloggers or
Display Units.
|
|
 |
Fresh
water conductivity
Sensor for measurement of conductivity and temperature in
fresh water.
|
|
 |
CTR-7
Conductivity-Temperature Profile Recorder
Solid state in-situ recorder for measuring the vertical
conductivity and temperature profiles in the sea.
|
|
Meteo Sensors
|
 |
Air
Pressure
Barometric pressure sensor for Aanderaa Automatic Weather
Stations and Display Units.
|
|
 | Air Temperature
Platinum sensor for air temperature measurements.
|
|
 | Relative Humidity
Designed for use with the Aanderaa Automatic Weather
Station 2700, Dataloggers 3660 or 3634 and other sensor read-out units.
|
|
 | Rainfall
A RAIN-O-MATIC water precipitation sensor adapted for use
with Aanderaa Field Monitoring Equipment
|
|
 | Sunshine
Duration
Measures the duration of visible solar radiation without
regard to its intensity.
|
|
 | Visibility
Compact and rugged visibility sensor designed for use
with Aanderaa Weather Stations, Road Weather Stations and
Environmental Monitoring Systems.
|
|
Wave & Tide
|
Water Level
|
 | WLR-7 & WLR-8 (6000 m rated)
Self-contained instrument for measuring wave parameters, water
level and water temperature.
|
|
 |
Water
Level & Temperature Sensor
Sensors based on measuring the hydrostatic pressure and
water temperature in a fixed submerged position, are designed to be
used with Aanderaa Dataloggers and Display Units.
|
|
Wave & Tide
|
 | WTR-9 Wave
& Tide Recorder
Self-contained instrument for measuring wave parameters, water
level and water temperature.
|
|
 |
Wave
Height Sensor
A sensor designed for installation on the Aanderaa
Coastal Monitoring Buoy 3280. The output from the sensor is
significant wave height and wave period.
|
|
Miscellaneous
|
Sensor Scanning
Unit
|
 |
Sensor
Scanning Unit 3010
Rugged unit for scanning Aanderaa sensors in the field,
and for enabling telemetry and on-site storage of data.
|
|
 |
Sensor
Scanning Unit 2800
Rugged electronic device for scanning a set of 12
Aanderaa sensors and converting their output signals into 10-bit
PDC-4 code
|
|
 |
Sensor
Scanning Unit 2900
Rugged electronic device for scanning a set of 16
Aanderaa sensors and converting their output signals into 10-bit
PDC-4 code
|
|
Computing Unit
|
 |
Computing
Unit 3015
Converts raw data from remotely placed field stations or
data buoys into data in engineering units. This unit can be
interrogated by telephone and is to be understood as a part of a
remotely located field station.
|
|
 |
Computing
Unit 3346
The unit converts PDC-4 raw data to engineering units,
which are displayed and presented as analog outputs scaled to range
for use with Programmable Logic Controllers (PLCs).
|
|
Datalogger
|
 |
Datalogger
3634
Rugged unit for reading up to 5 standard Aanderaa sensors
and for displaying, storing and transmitting the data in engineering
units.
|
|
 |
Datalogger
3660
Rugged unit for reading up to 18 standard Aanderaa
sensors and for displaying, storing and transmitting the data in
engineering units.
|
|
Deck Unit
|
 |
Deck
Unit 3127
A unit to display raw data and convert 10 bit PDC-4
standard Aanderaa code to RS-232C code.
|
|
Memory & Memory
Reader
|
 |
DSU Data
Storage Unit 2990
A portable, reusable, solid state module for storing data
in the 10-bit PDC-4 code. The DSU 2990E is designed for situations
demanding high storage capacity.
|
|
 |
DSU
Reader 2995
A unit designed to be used when reading data from Data
Storage Units (DSU) 2990 and 2990E. It converts the stored data to
dual polarity signals in accordance with the RS-232C standard.
|
|
Tips & Tricks
|
|
|
Top of Page |