English  Italiano

Prodotto

SBE-16plus V2

SBE-16plus V2
The SBE 16plus V2 (Version 2) SeaCAT Recorder measures temperature and conductivity (pressure optional) and provides high accuracy and resolution, reliability, and ease-of-use on moorings and other long-duration, fixed-site deployments.

SBE-16plus V2

Sea-Bird Electronics

The SBE 16plus V2 (Version 2) SeaCAT Recorder measures temperature and conductivity (pressure optional) and provides high accuracy and resolution, reliability, and ease-of-use on moorings and other long-duration, fixed-site deployments. Compared to the previous 16plus, the V2 incorporates an electronics upgrade and additional features, with six differentially amplified A/D input channels, one RS-232 data input channel, and 64 MB FLASH memory. Data can be output in XML as well as ASCII and HEX formats. Firmware upgrades can be downloaded through the communications port, without opening the instrument.

The SBE 16plus V2 uses the same temperature and conductivity sensors (and optional strain gauge or Digiquartz® pressure sensor) proven in 10,000 SeaCATs and MicroCATs. The unique internal-field conductivity cell permits the use of expendable anti-foulant devices, for long-term bio-fouling protection.

Calibration coefficients, stored in memory, permit data output in ASCII engineering units (degrees C, Siemens/m, decibars, salinity [PSU], sound velocity [m/sec.], etc.). The sample interval, ranging from 10 to 14,400 seconds, is user-programmable in 1-second increments. Between samples, the SBE 16plus V2 powers down, drawing only 20 microAmps. Nine alkaline D-cells provide power for 355,000 samples of C and T. Conditioned power (500 mA) is available for auxiliary sensors (dissolved oxygen, turbidity, fluorescence, PAR, etc.). Data is recorded in memory for 38.4K baud upload after recovery.

Real-time monitoring is practical using the SBE 16plus V2 3-wire RS-232C data output. The 16plus V2 is well suited to networked sensor arrays where its operation can be triggered by satellite, radio, or hardwire telemetry equipment. An optional inductive modem (1-wire loop) interface allows multiple SeaCATs to share a simple and robust telemetry cable.

Documents

Brochure
Brochure SBE-16plusV2 - Download

Manual
SBE-16plusV2 User Manual - Download

Application Note
AN 02D: Instructions for Care and Cleaning of Conductivity Cells (03/14) - Download
AN 06: Determination of Sound Velocity from CTD Data - Download
AN 10: Compressibility Comp of SBE Conductivity Sensors (05/13) - Download
AN 14: 1978 Practical Salinity Scale - Download
AN 27Druck: Minimizing Strain Gauge Pressure Sensor Errors - Download
AN 34: Instructions for use of Conductivity Cell - Download
AN 42: ITS-90 Temperature Scale - Download
AN 67: Editing Sea-Bird .hex Data Files - Download
AN 68: Using USB Ports to Communicate with Sea-Bird Instruments - Download
AN 69: Conversion of Pressure to Depth - Download
AN 71: Desiccant Use and Regeneration (drying) - Download
AN 73: Using Instruments with Pressure Sensors at Elevations Above Sea Level - Download
AN 75: Maintenance of SBE 5T, 5P, and 5M Pumps - Download
AN 83: Deployment of Moored Instruments - Download
AN 84: Using Instruments with Druck Pressure Sensors in Muddy or Biologically Productive Environments - Download
AN 90: Absolute Salinity and TEOS-10: Sea-Bird's Implementation - Download
Guide to CTDs - Download

User Guide
Guide to CTDs - Download


Correlated

SBE-38 Digital Oceanographic Thermometer
Sophisticated A/D acquisition electronics, ultra-stable thermistor, and state-of-the-art calibration provide the standards-level performance of an expensive AC bridge and platinum thermometer at a small fraction of the cost.
SBE-50 Digital Oceanographic Pressure Sensor
The SBE 50 is a high-accuracy, high-resolution (16 Hz sampling) pressure sensor, intended for towed vehicle, ROV, AUV, or other autonomous profiling applications at depths up to 7000 meters (23,000 feet).
SBE-5M
The SBE 5M pump module consists of a centrifugal pump head and a long-life, DC, ball-bearing motor contained in a compact, titanium pressure housing usable to 10,500 meters (34,400 ft) deep.
SBE-5P
The pump module is a compact unit consisting of a centrifugal pump head and a long-life, brushless, DC, ball-bearing motor. The pump impeller and electric drive motor are coupled magnetically through the housing, providing high reliability by eliminating moving seals.
SBE-5T Titanium Pump
The pump module is a compact unit consisting of a centrifugal pump head and a long-life, brushless, DC, ball-bearing motor. The pump impeller and electric drive motor are coupled magnetically through the housing, providing high reliability by eliminating moving seals.